Best Buy Tormek SVD-110 Tool Rest with Torlock : SVD-110 on Sale

Tormeks Tool Rest is ideal for grinding turning scrapers and special tools for woodcarving such as large scorps and inshaves. It also works with cabinet scrapers, screwdrivers, and hollowing tools. The tool rest has a generous surface, 90 x 110mm (3-1/2" x 4-1/4"), which permits a safe and steady positioning of the tool towards the stone. The bore is made with a special wedge shape, which increases the locking force by 250 percent, and the Tool Rest can be locked instantly at a chosen angle. This unique design is patented by Tormek...Read More

Discount Vermont American 22735 3/8-Inch Carbide Beading Router Bit : 22735 Reviews

NEW BEADING CARBIDE ROUTER BIT..Read More

Discount INCRA Build-It Panel, Large 11-3/4-by-15-1/2-Inch : BPANEL12 On Sale

• You can build the perfect jig in minutes with INCRA?s new Build-It System
• Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless
• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Build-It Panels are pre-cut and pre-drilled to instantly accept all of the components of the Build-It system...Read More

Best Buy Kreg SK03 Pocket-Hole Screw Kit in 5-Sizes : SK03 On Sale

This kit contains five of our most popular self-tapping screw sizes for Pocket-Screw Joinery, in a durable easy-to-carry case. All Kreg screws feature a deep #2 square drive, a needle-point self tapping tip, and a case hardened design built for strength...Read More

Best Buy Kreg NZ03 Magnetic Drawer Slide Mounting Tool : NZ03 On Sale

• Simplifies slide positioning for cabinet drawers
• Tool uses reference points to position slides parallel to drawer openings
• Works with most kinds of metallic slides
• Produces a perfect alignment at each use
• simplifies the process of positioning your slides accurately

The Kreg Magnetic Drawer Slide Mounting Tool simplifies the work of positioning your metallic slides to ensure smooth gliding drawer movement in cabinets. It uses the intersection of the cabinet stile and rail in face frame cabinets, and the cabinet side in frameless cabinets, as a reference point for positioning a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, which uses magnets to hold the slide in place, align the tool where the stile and rail meet, and drive the screws for a perfect alignment every time...Read More

Discount Dust Collector Grounding Kit On Sale

Improve dust collection safety using this kit. Includes 50 feet of braided bare copper multi-strand wire, two grounding screws, a 3/32" drill bit, two ring terminals, and five wire connectors. A continuous wire from each dust collection point to the dust collector is recommended...Read More

Discount (3 box set) Kreg PRS1040 Precision Router Table System : PRS1040 Reviews

Kreg PRS1040 Precision Router Table System is set to make a real name for itself in the industry. Includes a series of ground-breaking new features, including the innovative self-squaring t-square style fence, the fully enclosed tubular aluminum extrusion, and the steel-strut reinforced MDF top with its Easy-Slide Micro-Dot Skin, just to name a few. This item ships in three different boxes: the router table, the router fence, and the table legs...Read More

Best Price ITW PERFORMANCE POLYMERS 22045 "DEVCON" PLASTIC WELDER 1 OZ : 22045 Reviews

DEVCON PLASTIC WELDER (1 UNIT = 6 EACH) *25 ml. *Plastic bonding system that is even stronger than epoxy *3500 PSI sets in 15 minutes *Bonds plastic to plastic, plastic to metal and metals to metals *Thick formula fills gaps *Is high impact and water resistant *Easy to mix and requires minimal surface preparation *Clamshell..Read More

Best Price #1 MT Pen Turning Mandrel Reviews

Our economical mandrel system provides the base for turning precision pens, pencils, key chains, etc. To use, simply place the proper bushings and your blanks on the shaft and secure with the knurled brass mandrel nut. When turning projects such as key chains, which do not require the full length of the mandrel shaft, just slide the provided stop onto the mandrel until the needed length is exposed, and tighten the stop! Mandrel includes morse taper shaft, knurled brass shaft nut and compression stop nut...Read More

Discount Shop Vac Handle on Sale

With this handle connected to the Rockler 2-1/2" Dust Right Expandable Hose, you can hook up shop vac wands, bench sweepers and accessories in seconds for fast and easy shop-wide cleanup.

* Connects tool-free to most shop vacuum accessories (not included).
* Comfortable contoured handle.
* Air release valve prevents sticking and helps control suction power.
* Durable
* Lightweight

Connecting the Shop Vac Handle to 2-1/2'' dust hose requires our Shop Vac Adapter (Rockler #34654) and a hose clamp. For best results, use our Bridge Hose Clamp (Rockler #29509), which stays fully engaged with coiled hose for stronger holds.

Specifications:
* Hose adapter fits inside Handle's rear opening.
* Shop Vac accessories fit outside Handle's front opening.
* Rear opening: 2-1/4'' (I.D.)
* Front opening: 2-1/4'' (O.D.)..Read More

Best Buy Gripper(TM)100 Upgrade Kit on Sale

The GRR-Ripper(TM) GR-100 System is a revolutionary precision woodworking hand pushing tool composed of different adjustable/detachable components that are used on the table saw, router table, shaper & jointer. Great safety protection to users!..Read More

Best Buy Work Sharp WS3000 Wood Tool Sharpener : WS3000 Reviews

The Work Sharp 3000 wood tool sharpener lets you monitor stock removal from above with the "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This is an air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted "see-through" wheel allows for fast and precise sharpening of carving and lathe tools. The precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide. No jigs are needed; just select angle and sharpen. Lapping abrasive in the sharpening port increases burr removal and speeds sharpening. The rigid bevel angle settings and skew cam provide precise positioning of the sharpening port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup. Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper. It allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. The precise bevel angles are set in the sharpening port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration is required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone all in one port. The Work Sharp 3000 comes with a 2 year manufacturers warranty and the following accessories: 2 tempered float glass wheels, a "see-through" slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. It has a 110V, 1/5 hp motor, 580 rpm (gear reduced), and weighs 16 lbs...Read More

Best Buy Xenon White 2 Meter Switch (for 60 Watt Xenon Pocket Light System) Reviews

This is a switch for our Xenon Pocket Lights (sold separately, e.g. Rockler #39668). Shown in photo at bottom; transformer sold separately...Read More

Discount Super Glue Gel H-SGG : H-SGG On Sale

High strength professional grade Super Glue Gel instantly bonds wood, metal, china, plastic, leather and rubber...Read More

Best Price 1/2 X 1/4" HINGE MORTISING ROUTER BIT : 22112 On Sale

• HIGH SPEED ROUTER BIT
• HIGH QUALITY HIGH SPEED STEEL
• PRECISION CUTTING EDGES FOR EXTRA SMOOTH CUTS
• TEMPERED STEEL TO LENGTHEN LIFE OF CUTTING EDGE

NEW VERMONT AMERICAN HIGH SPEED STEEL 1/2 X 1/4" HINGE MORTISING ROUTER BIT..Read More

Best Buy Kreg K4MS Jig Master System : K4MS Reviews

• Removable Drill Guide for use with benchtop and portable bases
• Patented 3-hole drill guide allows you to make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses
• 1/8-Inch incremental settings for materials from 1/2-Inch to 1-1/2-Inch thick
• Dust Collection Shroud - Say goodbye to woodchips
• Large clamping recess allows you to use many different styles of clamps to secure your jig to the workbench

Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty.

Jig Master System At a Glance: Removable drill guide for use with benchtop and portable bases 1/8-inch incremental settings for materials from 1/2-inch to 1-1/2-inch thick Rear-mounted clamp design--rigidity and strength to keep workpiece in place Comes with portable base, SkillBuilder DVD, carrying case, and more Hardened steel guides with lifetime warranty

Sturdy benchtop jig utilizing the benchtop base for high-speed production Pocket-Holes.

Contractor-grade jig for work on the road with the portable base.

Three Tools in One
Thanks to its innovative Removable Drill Guide, the Kreg Jig Master System can be many tools at once. First, a sturdy benchtop jig utilizing the benchtop base for high-speed production pocket-holes, second as a contractor-grade jig for work on the road through use of the portable base, and finally as a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide.

Serious Woodworking Tool with High-Quality Features
Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable three-hole drill guide, and seemingly endless adjustability, this jig has it all. If you're serious about owning the highest quality tools, look no further than the Kreg Jig Master System.

Sturdy Toggle-Clamp
The Kreg Jig Master System features the same reliable rear-mounted clamp design featured on the very first Kreg jig. It's a proven design offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting.

In addition, the large clamping recess makes it easy to secure the jig to the workbench using Kreg's multi-purpose face clamps or any common bar clamp or c-clamp.

Removable 3-hole drill guide.

Three-Hole Drill Guide with Steel Core
The patented three-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses. Every Kreg drill guide features a hardened steel core that carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

Durable Construction and Optimized Drilling Angle
The blue body of the every Kreg jig is made from a heavy-duty glass-reinforced nylon, a unique composite material that offers the resiliency and flexibility you need without sacrificing strength and durability. To increase driving efficiency and minimize the overall size of the pocket-hole to less than 1-1/2 inches, this system also features an optimized drilling angle.

Wood-Chip Relief Hole Extends Bit Life
The Kreg Jig Master System includes one wood-chip relief hole for every drill guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket-hole in one plunge instead of three.

What's in the Box
Kreg Jig Master System, face clamp, portable base, drill guide spacer, material support stop, dust collection attachment, 3/8-inch stepped drill bit, six-inch square driver, three-inch square driver, starter screw set, starter plug set, quick-start guide, SkillBuilder DVD, and carrying case.

..Read More