Best Price Rockler Coarse Sharpening System Reviews

An effective, inexpensive way to maintain the edge on your valuable tools! Keep your sharpening chisels, plane irons, jointer knives and other expensive tools honed to perfection using this 12" square x 1/4" thick plate glass system. The plate glass is guaranteed to be the most level surface you can find to lap all your tools.

The Coarse Sharpening System includes the glass plate; a honing guide; 25 soft plastic feet; and two each of 220, 320, 400, and 600 grit, 4-1/2" x 11" Klingspor silicon carbide A weight paper with a "peel and stick" backing. Use the Coarse Sharpening System for removing nicks and correcting angles on chisels and blades, as well as for flattening waterstones...Read More

Best Buy VERMONT AMERICAN 3/8 V-GROOVE X 1/4 " RTR BIT : 22104 On Sale

• HIGH SPEED ROUTER BIT
• HIGH QUALITY HIGH SPEED STEEL
• PRECISION CUTTING EDGES FOR EXTRA SMOOTH CUTS
• TEMPERED STEEL TO LENGTHEN LIFE OF CUTTING EDGE
• V-GROOVE ROUTER BIT

NEW VERMONT AMERICAN HIGH SPEED STEEL 3/8 V-GROOVE X 1/4 " RTR BIT..Read More

Discount PSI Woodworking LRMSET220 220 Volt Long Ranger Multigate Switch System : LRMSET220 On Sale

• Turns on D/C when opening blast gate
• Turns off 220 volt D/C when last gate is closed.
• Low voltage wiring
• Easy installation
• Unlimited number of gates

..Read More

Best Buy Vermont American 22189 22.5 Degree HSS Raised Panel Router Bit : 22189 Reviews

NEW VERMONT AMERICAN HIGH SPEED STEEL 22.5 degree PANEL RAISING ROUTER BIT..Read More

Discount Vermont American 22449 9/16-Inch x 1-Inch Carbide Dbl Flute Straight Router Bit : 22449 Reviews

NEW VERMONT AMERICAN 9/16 X 1" STRAIGHT DOUBLE FLUTE CARBIDE ROUTER BIT..Read More

Best Buy 119mm (app. 4-11/16'') Venting Fan Kit On Sale

Take the heat off your electronic components! These exhaust fans help dissipate the heat created by the equipment in entertainment centers or TV cabinets to help prolong the life of your expensive electronics.

These exhaust fans help dissipate the heat created by the equipment in entertainment centers or TV cabinets to help prolong the life of your expensive electronics. Fans are easy to install and are pre-wired,110/120V. Finger guard measures 1/8". Media filter is 1/4" thick. Fan is 1" thick. Air movement is 64/80 CFM (cubic feet per minute.

Screws are not included due to different mounting board thickness possibilities. We recommend a #6-32 flathead screw that is 1-1/2" plus mounting material thickness...Read More

Best Price DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw : DW788 Reviews

• Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
• Exclusive tool-free blade clamps allow blade changes in seconds
• On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
• Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
• Arm lifts so blade can be easily threaded through the material for inside cuts

The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.

20-Inch Variable-Speed Scroll Saw At a Glance: Unique arm design for reduced vibration and quieter operation Electronic variable-speed control for application-specific performance Dependable 1.3 amp motor delivers 400 spm to 1,750 spm Convenient access to controls on front, upper arm Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Create detailed workpieces with the Variable-Speed Scroll Saw. View larger.

The saw's adjustable cast-iron table provides ideal support for projects. View larger.

Unique Arm Design for Accurate Cuts
A scroll saw needs to perform both reliably and accurately, whether you're crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw's double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.

This unique arm design also works to keep the saw's blade perpendicular to whatever you're working on, reducing the chance of over cutting or under cutting.

Easy to Handle with Variable-Speed Control
Adding to the saw's intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw's on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw's flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.

The scroll saw's electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.

Save Time with Tool-Free Blade Changes and Adjustable Table
Whether you're working with a variety of specialty materials or you're simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.

Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw's oversized, cast-iron table provides excellent support no matter what you're working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.

This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.

..Read More

Best Price INCRA Build-It System Starter Kit : BKITSTART Reviews

Quickly and easily create a wide variety of common and special purpose jigs and fixtures that you typically find hanging on the walls and rafters in just about any woodshop. The INCRA Build-It Modular Jig and Fixture Platform System is a highly versatile new method for creating those jigs and fixtures. The Build-It System begins with INCRAs Miter Slider adjustable aluminum runners. These tried and true jig and fixture runners have become a workshop staple for the production of sliding and fixed base jigs, but the true punch in the system occurs when these are combined with the NEW INCRA Build-It Panels and T-Slot Panel Connectors. The Build-It Panels are pre-cut and pre-drilled to instantly accept all of the components of the system. Add a Miter Slider in seconds and its automatically square to your saw blade with no tedious measuring or drilling required, then mount a fence in moments using the counter-bored mounting holes. The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. These specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding jig accessories, fences, stops, Build-It Hold Down Clamps and Build-It L-Brackets. With this new system, set up and connection is easily accomplished with a screwdriver and the included fasteners. Kit includes all of the Build-It System Components youll need to produce all of the beneficial jigs shown here and more. Just connect the parts! Starter Kit includes one each of the small and large MDF Base Panels, 18" Miter Slider, Hold Down Clamp, L-Bracket pair, 1/4"-20 Knob Kit, 18" T-track, 18" T-track Plus and two 18" T-slot Panel Connectors. Plus 5 free jig plans!..Read More

Best Price Wire Python, In-Wall Wire Pulling System on Sale

In-wall wire pulling and retrieval is quick and easy even through insulation with this creative system. Simply attach the wire to be fed to the flexible leader with magnet head, drop the magnet and leader through a 7/8" entry hole and capture the leader magnet with the magnetic paddle on the outside of the wall. The paddle features bottom rollers that allow you to steer the wire to the desired location to exit the wall without damaging paint, finish or the wall surface itself. Then simply pull the leader magnet through the exit hole to pull your wire out. Includes a 10' ball chain to attach for increased maneuverability.


..Read More

Best Buy Vermont American 22770 3/8-Inch Carbide Corner Round Router Bit : 22770 Reviews

NEW VERMONT AMERICAN 3/8 X 1/4" CARBIDE CORNER ROUND ROUTER BIT..Read More

Best Price Vermont American 22765 1-3/8-Inch Carbide Ogee Router Bit with Fillet : 22765 Reviews

• Razor sharp cutting edges are diamond honed for satin smooth cuts
• Radial Relief eliminates friction and chatter
• Optimized hook and shear angles for faster chip clearance and quicker feed rates
• Truest running shanks with concentricity of + .000"/-.001" T.I.R. (total indicator runout)
• Ball bearing guides on selected edging and trimming bits prevent burning and marring

NEW VERMONT AMERICAN 1-3/8 X 1/4" CARBIDE OGEE W/FILLET ROUTER BIT..Read More

Discount Micro Jig Single ZeroPlay Miter Guide Bar On Sale

• Easily square jig to the blade adjustment while securing through the top of the sled
• Accurately check alignment of saw blade to the miter slot with a dial-indicator (not included)
• Build your own unique jig or jigs with included plan
• Retro-Fit your existing cross-cut jigs for improved precision
• ZeroPlay Stops limit the travel distance for specialty jig

The ZeroPlay Guide Bar is a One-Touch Calibration miter bar (9 half in length) that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot, Shopsmith or even the tricky Generals miter slot. Because the ZeroPlay Guide Bar is a full profile miter that fits the exact width of the miter slot, you have no side-to-side play within the miter slot. The ZeroPlay Guide Bar System is for those who demand absolute accuracy and have zero tolerance for mistakes. It opens a completely new approach to how your crosscut jig functions...Read More

Discount iVac Automated Vacuum Switch Reviews

The Intelligent Vacuum Switch eliminates the distraction of turning on and off a dust collection system while you are operating potentially dangerous power tools. Received ETL safety approval. Three modes of operation: Auto, Off , On and Turn-On delay avoids the two power surges occurring at the same time Turn-Off delay clears work area of remaining debris after tool has stopped. Two input power cords permit operation from two separately protected circuits when the combined load from tool and vacuum exceed 15 Amps. Both power cords are individually protected with 12 Amp circuit breakers. Compact and lightweight, switch mounts to the wall. Designed to conveniently enhance your work shop safety...Read More

Discount Vermont American 22085 5/16-Inch HSS Corner Round Router Bit : 22085 Reviews

NEWVERMONT AMERICAN 5/16 X 1/4" CORNER ROUND ROUTER BIT..Read More

Discount Knobs and Bolts for T-Slot for Incra Build-It System, 6-Pack Reviews

With just a few Build-It components, scrapwood, a screwdriver and your imagination, you can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign at any time. Right Angle Brackets, Clamp and Knobs all work seamlessly with the T-slot for easy assembly and quick adjustability. See Incra's website for FREE jig plans!..Read More

Best Price Freud EB100 Edge Banding System : EB100 On Sale

Handles hot-melt adhesive wood and polyester edge banding. Comes complete with a heavy-duty industrial heat gun. Guides are completely adjustable and will accommodate materials as wide as 2-1/4". Capable of applying edge banding to straight and curved edges...Read More

Discount Micro Jig 1/8" Kerf SteelPRO MJ Splitter Kit (Blue) Reviews

This is a low profile splitter that also serves as a mini feather board for the keeper piece behind the saw blade. Simple, exact and extremely effective; cutting results are exceptionally precise and virtually burn free when using the MJ Splitter. Designed to be installed on a zero clearance insert (not included), the MJ Splitter features fool proof installation and a revolutionary concept that provides alignment surfaces of different thicknesses. Also includes the Auto Kerf Keeper, a dedicated device that engages automatically if the saw kerf begins to close to reduce tension on the MJ Splitter and the saw blade for safer operation...Read More

Best Buy Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems : DDS Reviews

• 3-Inch and 6-Inch lengths offered
• Deep 2 driver recess resists cam-out
• 3-Inch length is great in tight spots
• 6-Inch length is easy to use
• Drivers come in standard or hardened tip version

The Kreg DDS 3-Inch and 6-Inch Driver Set gives you choices. The Deep 2 Driver recess resists cam-out and comes in the 3-inch and 6-inch length set. The 3-inch length is great in tight spots; the 6-inch length is easy to use. Drivers for the drill come in either the standard or hardened tip version...Read More

Best Buy VERMONT AMERICAN 5/8 X 1" STRAIGHT DOUBLE FLUTE CARBIDE ROUTER BIT : 22450 On Sale

NEW VERMONT AMERICAN 5/8 X 1" STRAIGHT DOUBLE FLUTE CARBIDE ROUTER BIT..Read More

Best Buy Salice Push Face Frame Self-Opening Door System, 3/4'' overlay On Sale

This innovative system allows cabinet doors to swing open a full 110 degrees with nothing
but a slight inward "push" on the door itself. Its two main components, deluxe self-opening hinges and a magnetic release device, are state-of-the-art. The nickel-plated, self-lubricating steel hinges feature three-way cam-action adjustability for simple installation and precise door alignment. They install the same as any typical European concealed cup hinge, and are available to accommodate several levels of overlay for face frame cabinets (see options below). Backed by a lifetime warranty.

Each package includes:
* Two hinges
* 10mm x 55mm magnetic release device (with steel magnet catch)
* Adapter for the optional surface mounting of the release device (the device can also be recessed into the side, top or bottom cabinet panel)
* Two 0 mm screw-on mounting plates for the hinges
* Two steel symmetrical screw cover caps for the hinges
* Eight mounting screws
* Template for simple hinge installation
* Instructions

Hinge Specifications:
* Cup diameter: 35mm
* Cup depth: 11mm
* Solid steel with nickel plating...Read More