Best Price Work Sharp WSSA0002780 Belt Sharpening System Attachment : WSSA0002780 on Sale

You can monitor stock removal from above with the Work Sharps "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This will be the difference between sharpening and ruining a valued tool.Air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted "see-through" wheel for fast and precise sharpening of carving and lathe tools. Precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide. No jigs needed; just select angle and sharpen. Lapping abrasive in sharpening port increases burr removal and speeds sharpeningRigid bevel angle settings and Skew Cam provide precise positioning of the Sharpening Port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup.Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper Allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. Precise bevel angles are set in the Sharpening Port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone in one port. The Work Sharp 3000 comes with a 2 year manufacturers warranty and the following accessories: 2 tempered float glass wheels, a "see-through" slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. 110V, 1/5 hp motor, 580 rpm (gear reduced), 16 lbs...Read More

Best Price PSI Woodworking LCGRIND4 Complete 4-Piece Precision Lathe Chisel Sharpening System : LCGRIND4 On Sale

• Includes: Adjustable 'V' Pocket Jig to hold chisels up to 22-inch in overall length
• Includes: Grinding Platform for general purpose grinding
• Includes: Finger Nail Jig - for finger nail profiles on shallow gauges, or deep fluted bowl gauges
• Includes: Skew Grinding Attachment to assist in grinding precision bevels on any skew chisel
• Fixtures install easily to your grinder base

..Read More

Best Buy Rockler Coarse Paper Set for Plate Glass Sharpening System Reviews

Replacement abrasive for the Rockler Plate Glass Sharpening System. Includes two each of 220, 320, 400, and 600 grit, 4-1/2" x 11" Klingspor silicon carbide A weight paper with a "peel and stick" backing. Use the coarse paper for removing nicks and correcting angles on chisels and blades, as well as for flattening waterstones...Read More

Best Buy Tormek T-7 Water Cooled Sharpening System : Tormek T-7 Reviews

• Designed for the Toughest Work
• Can Run Continuously without Overheating
• 10-Inch Grindstone
• Strong 1/8-Inch Steel Housing
• Industrial Motor and Stainless Steel Hardware

The most complete edition of the finest wet stone sharpening system available, the T-7 is rated for continuous use and has a vast array of specialty jigs available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding while it continuously cools the tool edge to prevent "bluing" the metal. After grinding, the 8-3/4" x 1-1/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-7 System also includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Square Edge Jig, and Handbook and Instructional DVD. Seven-year warranty...Read More

Discount Smith's TRI-6 Arkansas TRI-HONE Sharpening Stones System. : TRI-6 Reviews

3 Stone Sharpener, 6" Stone Length, Rotating Triangular Base, Fine, Medium and Coarse Stones, Honing Oil and Groove In Base To Collect Oil...Read More

Best Buy Norton IM 313CIS Soft Arkansas Sharpening Kit : 66253242008 Reviews

• Self-contained bench sharpening unit with reservoir for oil and rotating axis that holds three stones in place for sequential use
• Includes three sharpening stones: 100-grit silicon carbide stone for repairing, 240-grit aluminum oxide stone for sharpening and maintaining, and 600-grit Arkansas (novaculite) stone for honing and polishing cutting edges
• 1/2 x 11-1/2 x 2-1/2 inch (H x W x D) size of oilstones makes them suitable for use as bench sharpeners for knives and tools
• Durable plastic case has a lid and no-slip rubber feet, and protects stones against breakage
• Angle guide to position tool correctly for sharpening, and 16 oz. of Norton sharpening stone oil for lubrication

The Norton IM313CIS soft Arkansas sharpening kit includes a 100-grit silicon carbide, a 240-grit aluminum oxide, and a 600-grit natural Arkansas stone, a self-contained three-stone bench sharpening unit with a lid and no-slip rubber feet, a reservoir, an angle guide, and a 16 oz. bottle of sharpening stone oil for lubrication. In the top of the bench sharpening unit, a rotating axis holds the stones firmly in place, protecting them against breakage, and bringing the desired stone into position for sharpening. The base of the sharpening unit is a reservoir that allows submersion of the unused stones, keeping them clean and saturated. The angle guide helps to position a tool correctly for sharpening. The three oilstones in this kit are used sequentially to restore cutting edges on straight-edged tools, such as knives, chisels, plane blades, and precision instruments; the silicon carbide stone is suitable for repairing a cutting edge, while the aluminum oxide stone is suitable for sharpening and maintaining the edge, and the Arkansas stone produces a honed and polished cutting edge.

The sharpening stone oil meets FDA requirements for use near food, and consists of pharmacopeia-grade mineral oil formulated with the correct lubricity for oilstone sharpening. It prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips. Each stone is also prefilled with oil to save time and eliminate the need to presoak it prior to use. The silicon carbide stone is fast-cutting and offers effective sharpening, even under light pressure. The aluminum oxide stone has a tough fracture- and wear-resistant grit that is more durable than silicon carbide and capable of sharpening to very close tolerances. The “soft” Arkansas stone is used for fine sharpening and honing, especially after sharpening with synthetic stones.

Both synthetic stones are created by grading material to a consistent particle size and blending it with bonding agents, and then molding and surface-finishing it. Arkansas stone is a natural hard abrasive stone that is mined for use. It is harder than most synthetic stones. These unusually large 1/2 x 11-1/2 x 2-1/2 inch (H x W x D) oilstones, which are suitable for bench use, are harder and more durable than a waterstone. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The synthetic silicon carbide and aluminum oxide oilstones conform to American National Standards Institute (ANSI) abrasive grit standards. There are no industry-wide standards for hardness, particle size, or color of natural sharpening stones, but Norton’s standards for its natural stones have become benchmarks.

Sharpening stones, or whetstones, are abrasive surfaces used to sharpen and hone the edges of steel cutting implements, such as chisels, knives, scissors, hand scrapers, and plane blades. Sharpening is the process of creating or re-establishing a cutting edge by grinding away portions of the metal to adjust the angle of the edge and reform the shape. Honing removes small imperfections. Stones can be flat, for working flat edges, or shaped, for edges that are more complex. Sharpening stones are made of natural or synthetic materials that range from softer to harder, and are categorized by the size of their abrasive particles, known as grit. A stone with a coarser grit is used when more metal needs to be removed (e.g., when sharpening a nicked or very dull blade); the stone with the finest grit produces the sharpest edge. Where numbers are assigned to specify grit, they range from coarser grit (low) to finer grit (high). Some sharpening stones are designed for use with a lubricating liquid, some can be used dry, and others can be used either wet or dry. When used with lubricating liquid, a sharpening stone can be called a waterstone or an oilstone, based on the lubricant required.

Norton Abrasives manufactures sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. Norton, now a brand of Saint-Gobain, meets ISO 9000 and 14001 certification for quality and environmental management standards.

What’s in the Box?

• 100-grit silicon carbide stone
• 240-grit aluminum oxide stone
• 600-grit Arkansas stone
• Bench sharpening unit with reservoir
• 16 oz. bottle of Norton sharpening stone oil
• Angle guide
• Instructions

..Read More

Best Price Tormek T-3 Sharpening System : Tormek T-3 On Sale

• Designed for 30 minutes of operation
• Housing is shock-proof ABS plastic
• 8-inch grindstone
• Ideal for sharpening woodworking hand tools, knives and scissors
• Industrial motor and stainless steel hardware

The T-3 gives you access to the Tormek high quality sharpening system at a favorable price and it is ideal for sharpening woodworking hand tools, knives and scissors. The T-3 utilizes a powerful industrial, maintenance free motor and the same grinding jigs and accessories as the larger T-7. The Square Edge Jig that comes with the T-3 improves accuracy and safety when sharpening wood chisels and plane irons. The jig can also clamp short and tapered tools firmly and copes with blades up to 76mm or 3" width. Besides the Square Edge Jig, the T-3 comes with the Angle Master, Honing Compound, users manual, and Tormek DVD. Covered by a seven-year warranty...Read More

Discount Work Sharp WSSA0002780 Belt Sharpening System : WSSA0002780 on Sale

You can monitor stock removal from above with the Work Sharps "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This will be the difference between sharpening and ruining a valued tool.Air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted "see-through" wheel for fast and precise sharpening of carving and lathe tools. Precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide. No jigs needed; just select angle and sharpen. Lapping abrasive in sharpening port increases burr removal and speeds sharpeningRigid bevel angle settings and Skew Cam provide precise positioning of the Sharpening Port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup.Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper Allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. Precise bevel angles are set in the Sharpening Port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone in one port. The Work Sharp 3000 comes with a 2 year manufacturers warranty and the following accessories: 2 tempered float glass wheels, a "see-through" slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. 110V, 1/5 hp motor, 580 rpm (gear reduced), 16 lbs...Read More

Discount Work Sharp WS3000 Belt Sharpening System Replacement Belt Kit : WSSA0002781 on Sale

Kit contains the same 3 (coarse, medium and honing) original abrasive belts that came with the WS3000 Knife Sharpener. These belts will make short work of all your knife sharpening needs...Read More

Best Price Rockler Coarse Sharpening System Reviews

An effective, inexpensive way to maintain the edge on your valuable tools! Keep your sharpening chisels, plane irons, jointer knives and other expensive tools honed to perfection using this 12" square x 1/4" thick plate glass system. The plate glass is guaranteed to be the most level surface you can find to lap all your tools.

The Coarse Sharpening System includes the glass plate; a honing guide; 25 soft plastic feet; and two each of 220, 320, 400, and 600 grit, 4-1/2" x 11" Klingspor silicon carbide A weight paper with a "peel and stick" backing. Use the Coarse Sharpening System for removing nicks and correcting angles on chisels and blades, as well as for flattening waterstones...Read More